The Shed magazine is back on sale in Australia
9 September 2018
Great news for Australian Shed magazine readers, The Shed is now on sale again in all Australian states at all good newsagents.
Great news for Australian Shed magazine readers, The Shed is now on sale again in all Australian states at all good newsagents.
In this short video we head to a small town in North Otago to enjoy the ancient skill of the blacksmith. This smithy is unique in that it also acts as a school that a group of farmers rallied together to ensure its survival. As featured in Issue 80 of The Shed
When we met Des Thomson and his expanding motorhome pod in Issue 76 of The Shed, we were very impressed with his workshop dust extractor. Happily for us all, Des has found the time to share with us how he builds these machines using and an old vacuum and the minimum of parts. Follow his step by step build of a workshop dust extractor in this Issue 80 of The Shed.
In The Shed Issue 79, July/August 2018, we head to Wellington to document Shea Stackhouse making a small knife from Damascus steel, fondly known as a Puukka (that’s Finnish for small knife). While we are there we hang around to meet some knife fans who receive knife making advice from Shea at one of his regular knifemaking classes.
We featured the Oamaru Steam and Rail Workshop in The Shed Issue 77, Jan/Feb 2018. Here’s a short video of one of their trains in action
This story comes about because of a mishap with my trusty car ramps which I had for more than 20 years. They were a clever pressed-steel design, a product of Spedding Ltd, one of the country’s original importers and wholesalers who took on manufacturing as a response to the import restrictions and import licensing laws of the time.
When I left school I took on an apprenticeship at William Cable in Wellington. Unknown to me at the time, this opportunity would lead to a life-long interest in model engineering. My apprenticeship gave me a wonderful grounding in all aspects of engineering.
THE ARC WELDER is still king of the small workshop. Its versatility and low cost make it the great all-rounder in welding. However, negotiating your way through the forest of available electrodes could be daunting to the newcomer.
When Karl Bishop had finished fixing and painting the fence on his newly acquired house he knew he needed to finish it with a gate. A gate would allow the dog to roam safely and it would add an element of security.
TO BUILD A SIMPLE trailer for a small light, runabout of 10ft to 13 ft long by about 5ft wide (3-4 metres long by up to 1.5 metres wide) this design is ideal. It is suitable for a dinghy, tinny, Parkercraft or even your children’s yacht. You can adapt this economical design, but componentry is not cheap, so keep it simple if you want it to remain as affordable as possible.
STEPPER MOTORS are to conventional DC motors as computers are to calculators – in other words, much moresophisticated. The ability of stepper motors to specify rotation precisely both by velocity and angle opens new doors for movement control. The downside is that to get the most out of these little beauties, you need ancillary digital-pulse control circuits, a fact which may deter some sheddies from exploiting their numerous advantages.
With a gas welding set or your own MIG or TIG welder at home in your workshop or shed, you need to understand gas cylinders and how you need to look after them.