So far we have begun to get acquainted with the Arduino and IDE, the “sketches” or programs that make it work, and we have got it working blinking an LED on and off. In this article we will delve a little deeper preparatory to diving right in with a fully edged project with some real- world applications in the next issue.
When I left school I took on an apprenticeship at William Cable in Wellington. Unknown to me at the time, this opportunity would lead to a life-long interest in model engineering.
Back in early March of 2018 a Sheddie was challenged to rebuild a Johnson 25 HP outboard motor that has been stored as a box of parts for 44 years. A few weeks later…
Why use an aluminium stepladder when you can build one out of timber in your shed. Bob Browning gets to it and shows us how.
In The Shed issue 78, May/June 2018 we meet two Sheddies who are restoring, preserving and upgrading valve radios. We head to Whanganui to meet Graham and Val Hawtree who are avid vintage radio buffs then to Retro Radios in Dannevirke who restore valve radios bringing most into the 21st century with Bluetooth and USB upgrades.
Matt James’ early passion for knives began when his father Alan handed him a book titled Step-by-Step Knife Making: You Can Do It! by David Boye. Now Matt shows you how you can do it too, how to make a Damascus Knife.
A couple of Shed readers start a rebuild project for the Shed Magazine
This story comes about because of a mishap with my trusty car ramps which I had for more than 20 years. They were a clever pressed-steel design, a product of Spedding Ltd, one of the country’s original importers and wholesalers who took on manufacturing as a response to the import restrictions and import licensing laws of the time.
Building an acoustic guitar is a very satisfying project that is within reach of most people with a modicum of woodworking experience. I have speed-built a guitar within a week, but for a more considered approach it is more usual to take three to four weeks.
You can’t do that! You’ll kill yourself!” said the hippy to the gypsy as he began slicing into into an LPG gas bottle with a four-inch grinder. Sixteen years ago, self-styled “hipsy” Stuart Guy found himself spending his first South Island winter in an un-insulated house truck.
There are two sure things in modern life (and no, not death and taxes): they are technology and cables. Lots and lots of cables. Some are used for interconnecting devices such as HID or human interface devices, a computer mouse, keyboards and the like. In many cases, wireless technology is thankfully removing the umbilical tether.
When a friend at Metpresco Engineering offered Jason Clarke an old, universal tool and cutter grinder for his garage workshop, Jason had to think about how he could power it.
I regularly need to cut a multiple number of short pieces on my saw bench for small box components, kids’ building blocks, small pieces for furniture etc. In the past I have clamped in place various contraptions to ensure each piece is the same length. It is difficult to hold small pieces to cut them accurately but this jig solves the problem.
An extension table for my drill press is one of the most used jigs in my workshop and it is very simple to make. The standard drill press, generally, has a small-sized table. For most woodworking tasks a bigger table is much more useful. As with any jig that you make for your workshop, you can add as many “bells and whistles” as you think you might need.
At CC Hydraulics, we do not build log splitters. In fact, we do not design log splitters or profess to be experts as there are excellent commercial log splitters builders and experts around. But we sell plenty of hydraulic equipment to people who design and build their own log splitters and through doing this well, we have gained a lot of knowledge about what works and what doesn’t. Believe me, there is a huge amount of misinformation out there.
