Wurth Flexidrive Shed 76 Jan–Feb 2018

As part of our article on sockets, spanners, and bolt sizes in The Shed Issue 76, enjoy this video of the Wurth Flexidrive standard in action.

Share:

More Posts

All aboard

This project started after a visit to The Plains Vintage Railway and Historic Museum in Ashburton (www.plainsrailway.co.nz). Our three boys had really enjoyed the model trains and, on the way home, asked if I could build one for them. As the kilometres went by, a few ideas began to form, and the seeds for this project were planted.
Over the Christmas/New Year break, I decided to retire to my workshop and start turning the thoughts and ideas into the real thing. The overall design is based on the TR189 locomotive pictured below.

The Shed magazine October/November 2026 issue 129 on sale now

Accomplished sheddie Chris Gordon’s extensive shed work continues, but this latest project comes with a Ducatisti advisory warning: This article contains graphic images and descriptions of procedures that some Ducati fans may find disturbing. Reader discretion is advised.
Chris wondered: with my previous projects completed, what to do next? Another motorcycle project would be good. I’d never done a café racer. The Gulf Racing livery was nice. What if I combine all of these? I say yes.
Consideration was then given to what base vehicle to use. By chance, a work colleague’s beloved 2001 Ducati ST4 Sports Tourer had recently suffered engine failure, leaving him stranded somewhere in the bowels of South Canterbury. Although the bike had been taken to a safe location, he couldn’t see a viable way forward for getting it back on the road. 
It’s where?
Discussions throughout the week resulted in a deal being done, and then I was the proud owner. Slight wrinkle: it was in Woodbury, a small town just out from Geraldine, South Canterbury. A van trip south, and the bike was in my possession.  During the loading of the bike in Woodbury, it became very apparent that this was a hefty beast. As I work alone, special considerations and handling techniques would be required to prevent further damage to the bike… or indeed, me. 

The sound of silence

As power tools become more and more affordable, the average shed or home workshop is full of tools that do work that would take ages with hand tools. Unfortunately, they also produce plenty of noise. If you are the one having all the fun with these great tools, you are likely to be well kitted out with the appropriate ear muffs, etc. But what about your neighbours or anyone else in the vicinity? There are ways to reduce harm to other people’s hearing, as well as the nuisance factor. First, let’s understand what noise is.