Autosol Rust Ex is a powerful, industrial-strength corrosion and stain remover that is quick and easy to use — it’s as simple as wiping on and rubbing off for standout results. It quickly removes rust, tarnishing, discolouration, oxidation, and even bluing, and will give metal surfaces a new lease of life. See hobeca.co.nz for more information.
Autosol Rust Ex is a powerful, industrial-strength corrosion and stain remover that is quick and easy to use — it’s as simple as wiping on and rubbing off for standout results. It quickly removes rust, tarnishing, discolouration, oxidation, and even bluing, and will give metal surfaces a new lease of life. See hobeca.co.nz for more information.
I’m currently making a mould for a rotational moulded boat. It’s a complex project with barely a square angle in it and dozens of folds and welds. It’s the sort of job that requires precision and the often needs more than two hands.
Clamps are useful but they are usually fiddly and can have a tendency to slip at the last moment especially where there aren’t any flat even surfaces to get a purchase on. So I wasn’t expecting too much when I was asked to try the Strong Hand utility clamps.
They are lighter than cast clamps so I had some doubts that they would have the clamping strength I needed for the more difficult pieces.
I was a bit dubious about the sliding action, too. It’s unusual to use sliding F-clamps in engineering but I’ve seen them used in boat-building and woodworking.
There’s going to be one lucky dad this Father’s Day
Be in to win a Husqvarna Pressure Washer worth RRP $729 when you subscribe to The Shed magazine.
Subscriptions start at only $39! Head here to our own shop magstore.nz to subscribe
Enter the code ‘WASHER’ at checkout to enter the draw.
Ts & Cs: Entries close 30 September 2025. This offer is open to New Zealand subscriptions only. The winner will be notified by email and have their name published in The Shed magazine.
“Steam is the only way to go,” says Win Holdaway, a Blenheim-based enthusiast who builds working models from scratch in his backyard shed.
Over the years, Win has spent thousands of hours constructing immaculate scale locomotives, including an 1870s’ Baldwin Standard TE, BR standard class 9F, and a Burrell Special Scenic Showman’s road locomotive. He is currently working on an inch-and-a-half scale 1925 Pennsylvania A5S 040 switcher, complete with tender. “It’s one thing to make a model that looks authentic and another to make it work,” says Win, whose working models can all hold 90-100lb of steam.
Win reckons he spent around 5000 hours building his Burrell Scenic Showman’s road locomotive alone. It is fittingly named Lynette after his wife. While he probably spends more time in his shed than the house, she is his greatest supporter. “It’s more than a hobby. This is his life,” says Lyn, a legal annotator who knows the importance of precision.
“I’m out here most days,” admits Win who, if not in his own workshop, can often be found down at Brayshaw Heritage Park with fellow model engineering enthusiasts.
The Shed magazine is eclectic, informed, and always fascinating. Aimed at those with a few tools and perhaps a few clues: this is the magazine for real sheddies.
Packed with ideas, projects, advice, and peeks into other people’s sheds providing inspiration, ideas, and techniques, or just for the sheer enjoyment of the sheddie’s endless inventiveness, The Shed is the project enthusiast’s bible.
Sign up here to The Shed monthly email newsletter for exclusive reader offers.
Sign up here to The Shed monthly email newsletter for exclusive reader offers. For signing up, we’ll send you a free copy of The Shed, just simply put your postal address in the form.