Here’s a new product from Selleys that simply sticks almost anything without screws or clamps. Instantly hols even on vertical surfaces. Great product for those looking for an alternative to drilling and plugging walls etc.
We thought you would find this video interesting to watch. It shows the impressive strength of Instant Hold Liquid Nails from Selleys – it’s a pretty quick fix.
Meet the knifemaker from The Shed Issue 86 and watch how he makes a fully forged knife in his Whanganui shed
This brick forge is constructed from lightweight insulating firebrick. Known as a K26 brick it is available from Certec in Auckland.
These insulating fire bricks are rated to 1426°C and measure 230x115x75mm. They are commonly used to line foundry furnaces, forges, and kilns. These soft bricks can easily be cut to size with an ordinary wood saw, drilled to create burner openings, or routed to create channels.
Watch this video to see how we built this gas forge and an oil-powered version as well.
As featured in The Shed Issue 85
Got some tiling to do? Need some best practice tips?
Well here are three videos from Selleys with advice on fixing tiles to a surface, grouting and finally sealing the tiles.
Its all done using Selleys products so you can be sure of a great result.
Enjoy.
“The sound of that Pearse wing destroying itself in a matter of seconds as it tore itself apart in a chain reaction fashion on the 14th September in 2012 at Whenuapai Air Base is a sound that I don’t think any of us will forget for a long while.” Retired Air New Zealand captain, Neville Hay as test pilot was not apprehensive but noted, “You have to think about everything you do. You can’t rely on memory of flying the plane.”
Start me up is the world’s first car show based on the phenomenon of “cold starting” – an online craze where cars that haven’t run for years or more – typically decades have their engines fired up or “cold stated”.
Screening now on TVNZ On Demand and soon on the Duke channel. Click ‘Read more” to get the full rundown on the show.
Back in the early ‘70s, an Auckland bloke gets hold of a 25 hp Sea Horse Johnson outboard motor – it’s knackered but it has potential.
He takes it all to pieces, orders all the bits to get it up and running again then wraps it up, bits and all, in a New Zealand Herald newspaper and packs it in a box, presumably as a rainy day project. For reference, the outboard is from 1970 and the Herald is from December 1975.
Cambridge sheddie Kim Dawick decided to build a drift trike for a mate’s birthday. It was relatively simple and so much fun to ride he decided to build eight more to bring the old gang from school back together. Click through to see the Kim take Mike’s trike for a spin, and another one, and another one….
In this short video we head to a small town in North Otago to enjoy the ancient skill of the blacksmith. This smithy is unique in that it also acts as a school that a group of farmers rallied together to ensure its survival. As featured in Issue 80 of The Shed
In Issue 80 of The Shed, Des Thomson gave a step by step guide on how to build a workshop dust extractor system from an old vacuum and a few bits of metal. In this video he demonstrates his mobile unit for housing the finished extractor set up.
In Issue 79 of The Shed we featured Whanganui glass artist Carmen Simmonds. In this video by Tracey Grant, Carmen shows us in some detail a few of her creative practices and we showcase some of her outstanding creations with glass and occasionally brass. Carmen is currently president of the New Zealand Society of Artists in Glass.
When builder Steven Price suffered a severe neck injury at work he turned the accident into an opportunity. The Whanganui sheddie no longer mounts scaffolding; instead he designs and constructs much smaller buildings. Enjoy this video and see Steven creating and discussing his work using totara and kauri to make stunningly unique birdhouse creations in his garden and shed.
In this second video of this vintage and valve radio collection from Shed Issue 78, we watch Graham do some repairs to a radio that has just arrived in his workshop.
Aucklander David Curry shares with us his shed where he makes skeleton clocks, stationary engines, tools and more.
