Big drill bits for every drill
14 August 2019
Tusk HRS drill bits, made from M2 high-speed steel also have a titanium nitride coating for longer life. Their 135-degree tip offers a faster drilling rate and lower feed pressure.
Tusk HRS drill bits, made from M2 high-speed steel also have a titanium nitride coating for longer life. Their 135-degree tip offers a faster drilling rate and lower feed pressure.
In the October/ November Issue 86 of The Shed, we first head to Whanganui to meet blacksmith Josh Timmins.
Josh has his own way of making knives and axes and shows us how to make a Viking Knife starting with a piece of new steel right through to the finished product.
Then we head to…
See this link to find your nearest Australian retailer https://www.theshedmag.co.nz/home/2018/9/5/find-your-local-australian-the-shed-retailer or head to https://magstore.nz/ to buy a copy or to subscribe for six months – two years, print and digital versions available.
Australia’s Lucas Mill celebrated its 25th year in the business of making portable sawmills. More than 18,500 Lucas Mill portable sawmills have been sold into more than 100 different countries, and the company says its first portable swing blade sawmill is still operating.
As winter approaches and power outages become something of a given, we thought it might be useful to identify what you need to know about generators, safety, their uses, and how to connect them to your home.
A generator is a motor driving an alternator to produce power, and with the advent of these Inverter Generators (see my review of Honda inverter generators) the basics haven’t changed, but how they operate has.
Honda’s inverter generators are famous for their reliability, fuel efficiency and portability but they also supply ‘clean’ power for phones, laptops and power tools. Older generators can produce power spikes or variable voltages that can damage modern appliances. The portable EU10i was the first generator of its size to feature a sine wave inverter assuring commercial-quality electricity.
Always wanted your own knife-makers forge? Well in the July/August Issue 85 of The Shed we show you how to make two differing styles, one using LPG power and one using used engine oil to create the heat. What a great way to dispose of old oil and both give great results without incurring huge build costs.
Then we…
Watch this video and be impressed at what these core bits can do
The drills have a vacuum-braised diamond cutting edges for longer life and strength. The range of Tusk VB core bits are for drilling, grinding and cutting using angle grinders for precision and control.
The answer came like a light bulb. In fact, it was a light bulb – one that fits snugly under the top of the drill press and shines on the complete work area below, with little or no chance of casting unwanted shadows. It’s easy to make, as you can see from the step-by-step pictures.
Good news, the Auckland Blade show is back on again this spring. Same location, 545 Parnell Road, Parnell, Auckland and this year it’s on the weekend on 12 & 13 October. See their poster for more info.
The Shed will see you there.
First we checked to make sure that the there was in fact some play in the quill and indeed the dial gauge showed run-out of over 0.5 mm, quite a significant amount of wobble. I felt vindicated and quietly pleased that I hadn’t dragged Russell away from oiling and balancing the wheels of industry on false pretences.
Back when I was sharpening drills as part of my punishment, I discovered there were slow spiral and straight-fluted drills for brass and plastic. You may need a straight-fluted drill. You can create this by “backing off” the first 3 or 4 mm of a spiral-fluted drill.
Got some tiling to do? Need some best practice tips?
Well here are three videos from Selleys with advice on fixing tiles to a surface, grouting and finally sealing the tiles.
Its all done using Selleys products so you can be sure of a great result.
Enjoy.
The particular process we are looking at in this article does not effectively alter the dimensions of the part as it etches into the surface rather than deposits on top. Black oxide finish is sometimes called parkerizing and it is common on components such as gun barrels because it does not involve high enough temperatures to cause distortion and there is no dimensional change.
In the May/June 2019 Issue 84 of The Shed we share the amazing skills on one Daniel Strekier who built himself his own extraordinary bicycle… almost entirely out of wood!
It really is something to behold and you just have to sit back and admire the skills that went into making this incredible piece of usable art.
Jude Woodside sits down with Brent Sandow and gets all the background on this, NZ’s most accomplished knifemaker, who shares his inspirations and skills with us.