This knife show in Auckland on October 6 and 7 is not one to be missed for those who appreciate the great craft of knifemaking. They will be plenty of stands with all sorts of knives and knifemaking paraphernalia to enjoy, discuss and purchase.
When I left school I took on an apprenticeship at William Cable in Wellington. Unknown to me at the time, this opportunity would lead to a life-long interest in model engineering.
We featured the Oamaru Steam and Rail Workshop in The Shed Issue 77, Jan/Feb 2018. Here’s a short video of one of their trains in action
Matt James’ early passion for knives began when his father Alan handed him a book titled Step-by-Step Knife Making: You Can Do It! by David Boye. Now Matt shows you how you can do it too, how to make a Damascus Knife.
We couldn’t squeeze all these great photos into the printed March/April 2018 magazine so here are the shots that missed out, enjoy.
This story comes about because of a mishap with my trusty car ramps which I had for more than 20 years. They were a clever pressed-steel design, a product of Spedding Ltd, one of the country’s original importers and wholesalers who took on manufacturing as a response to the import restrictions and import licensing laws of the time.
You can’t do that! You’ll kill yourself!” said the hippy to the gypsy as he began slicing into into an LPG gas bottle with a four-inch grinder. Sixteen years ago, self-styled “hipsy” Stuart Guy found himself spending his first South Island winter in an un-insulated house truck.
The Alfa Romeo 8C Monza has a place in many people’s dream garage. The 8C dominated motor racing in the early 1930s and was the epitome of the pre-war era of automotive design.
How often do we need to bend sheet metal, but are put off because of the drama involved? We may turn to a couple of bits of angle iron fitted into the jaws of a bench vice and try to exert even pressure as we fold the metal. I’ve done this and felt less than satisfied with the results.
If there’s one sort of person that cannot resist a challenge that’s a Kiwi backyard inventor. When a mate sent Dave Hunger an internet photo of a giant wheeled contraption and a challenge to reproduce it, Dave rose to the task.
I’ve discovered you don’t have to be New Zealand-born or a male to enjoy this experience, says Natalia.Ever since I have known my husband Nigel, I wanted him to build a small hovercraft for me so that I could drive and handle it myself.
At CC Hydraulics, we do not build log splitters. In fact, we do not design log splitters or profess to be experts as there are excellent commercial log splitters builders and experts around. But we sell plenty of hydraulic equipment to people who design and build their own log splitters and through doing this well, we have gained a lot of knowledge about what works and what doesn’t. Believe me, there is a huge amount of misinformation out there.
Stephen Snedden has been described as the inventor’s inventor and on meeting him it’s not hard to see why. He has an infectious enthusiasm, a can-do attitude and a willingness to share his knowledge.
When I left school I took on an apprenticeship at William Cable in Wellington. Unknown to me at the time, this opportunity would lead to a life-long interest in model engineering. My apprenticeship gave me a wonderful grounding in all aspects of engineering.
THE ARC WELDER is still king of the small workshop. Its versatility and low cost make it the great all-rounder in welding. However, negotiating your way through the forest of available electrodes could be daunting to the newcomer.
